Dishwasher Repair in Las Vegas

Common dishwasher problems we fix

Most dishwasher calls come down to water that won't leave, water that ends up on the floor, or dishes that come out no cleaner than they went in. Here is what usually sits behind each symptom.

Standing water in the bottom

A puddle left in the tub after a cycle usually points to a clogged filter, a kinked or packed drain hose, or a drain pump that hums but no longer moves water. A blocked air gap or a clogged disposal inlet can cause the same thing, because the dishwasher drains through both.

Water coming out of the air gap

That small chrome cap next to the faucet is the air gap. When water sprays or bubbles out of it, the line between the air gap and the disposal or sink drain is restricted. The usual culprits are food packed inside the air gap itself, a clogged hose, or a newly installed disposal whose knockout plug was never removed.

Leaking onto the floor

Leaks tend to come from a worn door gasket, a cracked tub or sump, a loose hose clamp, or a failing inlet valve under the front kick plate. A dishwasher that isn't level can also let water slip past the door seal.

Dishes come out dirty or gritty

We usually find spray arms with blocked holes, a clogged filter, a weak circulation pump, or a water inlet valve that isn't letting enough water in. Gritty residue often means food is being recirculated because the filter is overdue for cleaning.

Dishes stay wet

A failed heating element, a bad high-limit thermostat, or a vent fan that has stopped can leave every load damp. Many newer European-style machines dry by condensation, so some moisture on plastics is normal for those models.

Won't start or stops mid-cycle

Common causes include a door latch switch that no longer closes, a failed control board, a blown thermal fuse, or a touchpad that has stopped responding.

Error codes

Codes differ by brand and model, but they often point to drain, fill, heating or leak-sensor faults. Write the code down before you call so we can narrow things down before the visit.

What happens on the visit

We start by asking what you've noticed, then run the dishwasher and watch the fill, wash and drain stages. From there we test the parts that match the symptom, whether that's the pump, the inlet valve, the heater or the latch, and check the drain path through the air gap and under the sink.

You get a clear explanation of what failed and a quote before any work begins. If a part has to be ordered, we tell you the timeline before you approve. Once the repair is done, we run a test cycle and check for leaks before we leave.

Every repair carries a 90-day warranty covering parts and labor. You receive an itemized invoice by email and can pay online by card.

Brands and types we repair

We work on built-in, under-counter dishwashers from Bosch, Miele, KitchenAid, Whirlpool, GE, Samsung, LG, Thermador and Maytag, plus drawer-style units from Fisher & Paykel. Panel-ready models that match your cabinetry are part of our regular work as well.

Because the dishwasher and disposal share a drain, we often handle both on one visit. If the disposal is the real source of a backup, our garbage disposal repair page explains what we do there.