Commercial Washer & Dryer Repair in Las Vegas

Commercial washer problems we fix

Commercial washers are built to run many more cycles than a home machine, but they fail in predictable ways. These are the symptoms we see most, with the usual causes behind them.

Won't start or door won't lock

Front-loaders and many top-loaders won't start until the door lock confirms it is closed. A worn lock assembly, a bent strike, or a broken wire in the door harness are common causes. A payment problem can look the same, so we check whether the machine is actually receiving credit.

Water left in the tub

On gravity-drain machines, a drain valve packed with lint, socks or coins is the usual culprit. On pump-drain models, the pump or the hose leading to it is clogged or the pump motor has failed.

Won't extract, or shakes hard on spin

Clothes coming out soaked usually trace back to a drain problem, a slipping belt, a failing motor or drive, or an out-of-balance sensor stopping the spin. Violent shaking points to worn shocks, springs or suspension parts.

Leaking

Torn door boots and gaskets, loose hose clamps, a cracked dispenser and a drain valve that won't seat fully are the leaks we find most often.

Slow fill and loud bearings

A slow fill often means scale-clogged inlet screens or a weak inlet valve. A roar that gets louder at high speed is usually tub bearings, and that repair is worth catching before the seal fails and water reaches the bearings.

What staff can safely check before calling

• Confirm the machine has power: check the breaker and any service switch, and look for a tripped GFCI on the circuit.
• Note any error code on the display. It speeds up diagnosis, so include it when you call or email.
• Clean the dryer lint screen and look at the exterior exhaust hood for lint buildup or a stuck damper.
• For a washer full of water, turn off power before opening anything, and expect water when you do.
• For a gas dryer that smells like gas, stop using it, shut the gas valve behind it, and call the gas company.

Please don't bypass a door lock, high-limit or sail switch to keep a machine running. Those parts are there to prevent floods, injuries and fires.

Equipment and brands we service

We repair Speed Queen, Dexter, Maytag Commercial, Huebsch, Continental Girbau, American Dryer and Ipso equipment. That includes coin-op and card-op top-load and front-load washers, soft-mount and hard-mount washer-extractors, single-pocket and stacked dryers, and large tumblers in on-premise laundry rooms.

Many of these machines share the payment side of the problem too. If the washer is fine but won't accept coins or cards, see our coin and card reader repair service.